沙索非离子乳化剂异构 C13 脂肪醇聚氧40醚

NOVELUTION 3400
 
异构 C13 脂肪醇聚氧(40)醚 ∕ ISO-C13  alcohol ethoxylate (40EO)

技术特性 ∕Technical data
 


项目 ∕ Items
外观 ∕ Appearance
离子型 ∕Ionic type
活性物含量 ∕Active substance
       pH值（1%水溶液) ∕pH (1% water solution)
浊点(1%活性物在10％NaCl水溶液中) / 
       Cloud Point (1% a.m. in 10% NaCl solution)
HLB 值∕HLB value

产品特性	∕ Product properties 
 


单位∕Unit




% wt 


℃
 


保证值 ∕ Description
白色片状固体/ White flake solid
非离子/ Nonionic
~100.0
6.0 ~ 7.5 

             > 80 

~18 
 
优异的水性涂料及色浆润湿剂及辅助乳化剂。适用于水性色浆体系及乳胶漆色浆的制备。可改善乳液剪切稳定性和乳胶漆的冻融稳定性；该产品可在乳胶漆制备过程中加速颜填料表面的润湿效率，缩短润湿分散时间。由于其原料醇（异构 C13 醇）特殊的多支链结构，使其具有以下特性：
?	EO 加成数窄分布，分子量分布窄；
?	不含 APEO，低 VOC 含量；
?	较低气味，比 C11 醇和四聚法制得的 C13 醇乙氧基化物气味小；
?	良好的渗透、润湿性能，可提高乳胶颗粒的冻融稳定性、热稳定性和剪切稳定性；
?	降低聚合物的凝聚；
?	与电解液及腐蚀性溶液中具有良好的相容性，在较宽的 pH 范围内化学稳定性好；
?	低凝固点；
?	可与其他表面活性剂复配，具有优良的协同作用；
?	环境相容性好。
Excellent water-based colorant wetting agent and coemulsifier. It is suitable for the preparation of water-based colorant system and latex. It can improve shear stability and freeze-thaw stability of latex paint. And It also can accelerate the surface wetting efficiency of pigment and filler, and shorten dispersing time. As a result of the special multi-branched structure of this product, the product has the following properties:





??
??Narrow range distribution of EOs, narrow molecular distribution; 
??APEO-free, low VOC content; 
??Lighter odor than C11-alcohol ethoxylates and C13-alcohol ethoxylates derived from tetra propylene. 
??Good wetting and dispersing performance, can improve the freeze-thaw stability, thermal stability and shear stability; 
??Decrease agglomeration of polymer 
??Good compatibility with electrolytr and corrosive solution, good chemical stability over a wide pH range; 
??Low solidification point; 
??Synergistic effects with other surfactants; 
??Favorable environmental characteristics; 
应用领域  ∕ Application areas 
适合在各种工业应用中作为乳化剂或润湿分散剂使用，如乳液聚合、涂料、纺织、皮革等领域。不含APEO，可作为APEO类乳化剂或润湿分散剂的替代品应用在各种应用的配方中，可用于制备细粒径，高光泽的乳液。在乳胶漆中能有效润湿钛白粉和其他颜填料，并作为辅助乳化剂，稳定聚合物乳液，如纯丙、丙等；可单独使用或与阴离子乳化剂合用，基于单体用量为0.1～0.5%。 
It is suitable for various industrial applications as emulsifier or wetting and dispersing agent, such as emulsion polymerization, painting, textile, leather, etc. It can be incorporated in all kinds of formulations as replacement of APEO, and make fine particle and high gloss latex. In latex formulation, It can effectively disperse titanium dioxide and other extenders, and acts as coemulsifier in formulations such as acrylate homo and copolymers, vinyl acetate-acrylate copolymers, and styrene-acrylate copolymers. It can be used independently or mix with anionic in formulation, the amount calculated on the monomers ranges from 0.1 to 0.5 %. 
包装规格 ∕ Packaging  
包装：200kg塑料桶或铁桶，1000kg桶装以及散装。 
Packaging: 200kg plastic drum or steel drum, 1000kg drum and bulk.. 
贮存 ∕ Storage and handling 
本品应密闭贮存于阴凉、通风、干燥处，避免日晒雨淋。贮存温度不应**40?C。若产品存放温度过低，则可能出现浑浊、分层甚至凝固等现象。在使用物料前，必须完全混匀桶内或容器内的物料。在上述贮存条件下，自生产日期起，该产品的保质期为2年。
The product should be stored in a cool, dry and ventilated area in tightly closed containers below 40℃, protected from light and moisture. If the product is stored at a low temperature it may turn cloudy, solidify or form layers. It is therefore advisable to heat and thoroughly mix the contents of drums or containers before using in order to obtain a homogeneous product. In above storage situations, the shelf life of this product is 2 years from the production date.